Site Navigation
.
Combat Index provides technical information products to a wide range of organizations and individuals
- Military bases and installations
- Military contractors
- Deployed forces
- US Navy ships
- International military services
- Law enforcement
- Commercial contractors
- Equipment restoration groups
- Model builders
- Average people who need to know
.
.
.
.
.
.
.
.
.
.
.
US Military Technical Manual Series:
WORKSHOP EQUIPMENT AND TOOLS (buy it here)
All technical manuals included on this CD-ROM are listed below. Click on the (Sample PDF) links to preview the first few pages of the documents, including, where available, title page, table of contents, scope, and sample diagrams.
| Number | Title | Date | Pages |
| LO
5-4940-228-12 (Sample PDF) |
LUBRICATION ORDER: SPRAY OUTFIT, PAINT, MODEL 50-6609, ENGINE, GASOLINE, 3 HP STANDARD, MODEL 2AO16-3 | 27 JUNE 1979 | 5 |
| TB
5-3895-366-12 (Sample PDF) |
WARRANTY PROGRAM FOR SAW, ABRASIVE DISK, CONCRETE: ENGINE DRIVEN, SELF-PROPELLED, NSN 3895 01-303-8909 MODEL C-3000-30 | June 3 1991 | 7 |
| TB
9-4910-492-30 (Sample PDF) |
HOISTING UNIT TRUCK MOUNTING: ORGANIZATIONAL MAINTENANCE, SET NO. 7 (4910-754-0652) INSTALLATION IN ONE 2-1 / 2-TON, 6X6 CARGO TRUCK, M34 OR M35 | 27 November 1970 | 6 |
| TB
9-4910-556-35 (Sample PDF) |
CALIBRATION PROCEDURE FOR STE-M1/FVS TEST SET | 6 August 2003 | 30 |
| TB
9-4910-744-30 (Sample PDF) |
SHOP EQUIPMENT, AUTOMOTIVE MAINTENANCE AND REPAIR, FIELD MAINTENANCE BASIC (NSN 4910-00-754-0705), INSTALLATION IN ONE M109A3 SHOP VAN TRUCK, TWO M35A2 CARGO TRUCKS, AND THREE M105A2 CARGO TRAILERS | 17 APRIL 1987 | 80 |
| TB
9-4910-746-30 (Sample PDF) |
SHOP EQUIPMENT, AUTOMOTIVE MAINTENANCE AND REPAIR, FIELD MAINTENANCE (NSN 4910-00-754-0706) INSTALLATION IN ONE M109A3 SHOP VAN TRUCK, ONE M35A2 CARGO TRUCK, AND TWO M105A2 CARGO TRAILERS | 5 SEPTEMBER 1984 | 52 |
| TB
9-4940-250-35 (Sample PDF) |
CALIBRATION PROCEDURE FOR HYDRAULIC ACTUATOR TEST STAND, BARKLEY AND DEXTER, MODEL BDL 812121 | 1 May 1987 | 9 |
| TB
9-4940-302-30 (Sample PDF) |
SHOP EQUIPMENT, CANVAS AND GLASS (NSN 4940-00-209-6239) INSTALLATION IN ONE 280 MAINTENANCE SHELTER (NSN 4940-00-919-8409) O R ONE IS0-2-1 MAINTENANCE SHELTER (NSN 5411-01-124-1377) | 14 September 1984 | 38 |
| TB
9-4940-314-30 (Sample PDF) |
SHOP EQUIPMENT, FUEL AND ELECTRICAL SHOP, ORGANIZATIONAL MAINTENANCE (NSN 4940-00-209-6228) INSTALLATION IN ONE 280 MAINTENANCE SHELTER (NSN 4940-00-919-8409) AND ONE IS0-2-1 MAINTENANCE SHELTER (NSN 5411-01-124-1377) | SEPTEMBER 1984 | 42 |
| TB
9-4940-316-30 (Sample PDF) |
SHOP EQUIPMENT, SMALL EQUIPMENT REPAIR SHOP (NSN 4940-00-209-6232) INSTALLATION IN ONE 280 MAINTENANCE SHELTER (NSN 4940-00-919-8409) AND ONE ISO-2-1 MAINTENANCE SHELTER (NSN 5411-01-124-1377) | September 1984 | 43 |
| TB
9-4940-319-30 (Sample PDF) |
SHOP EQUIPMENT, WELDING SHOP (NSN 4940-00-209-6240) INSTALLATION IN ONE 280 MAINTENANCE SHELTER (NSN 4940-00-919-8409) AND ONE ISO-2-1 MAINTENANCE SHELTER (NSN 5411-01-124-1377) | JULY 1987 | 37 |
| TB
9-4940-321-30 (Sample PDF) |
SHOP EQUIPMENT, MACHINE SHOP, ORGANIZATIONAL MAINTENANCE (NSN 4940-00-209-6238) INSTALLATION IN ONE 280 MAINTENANCE SHELTER (NSN 4940-00-919-8409) AND ONE ISO-2-1 MAINTENANCE SHELTER (NSN 5411-01-124-1377) | September 1984 | 76 |
| TB
9-4940-323-30 (Sample PDF) |
SHOP SET, FIELD MAINTENANCE SPARE PARTS STORAGE, SET NO. 1 (4940-322-6016): A N D SHOP SET, FIELD MAINTENANCE SPARE PARTS STORAGE, SET NO. 2 (4940-322-6017): INSTALLATION IN THREE SEMITRAILER CARGO VANS, M128A1 | 5 January 1967 | 8 |
| TB
9-4940-325-30 (Sample PDF) |
SHOP EQUIPMENT, CONTACT REPAIR SHOP, LIGHT, ORGANIZATIONAL MAINTENANCE INSTALLATION IN ONE M151A2 1/4 TON, 4 X 4, UTILITY TRUCK (NSN 4940-00-209-6219) | 28 January 1985 | 24 |
| TB
9-4940-331-30 (Sample PDF) |
SHOP SET, SPARE PARTS STORAGE FIELD MAINTENANCE (NSN 4940-00-322-6016) INSTALLATION IN ONE M35A2 CARGO TRUCK | 25 March 1970 | 29 |
| TB
9-4940-332-30 (Sample PDF) |
SHOP SET, SPARE PARTS STORAGE, FIELD MAINTENANCE, SET NO. 2 (NSN 4940-00-322-6017) INSTALLATION IN ONE M35A2 CARGO TRUCK | 11 March 1970 | 29 |
| TB
9-4940-548-30 (Sample PDF) |
SHOP SET, RADAR AND RADIO REPAIR, FIELD MAINTENANCE SIGNAL CORPS (NSN 4940-00-508-1036) INSTALLATION IN ONE M109A3 SHOP VAN TRUCK | FEBRUARY 1987 | 32 |
| TM
3-4940-200-15 (Sample PDF) |
OPERATORS. ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT. AND DEPOT MAINTENANCE MANUAL MECHANISM, VALVE REPLACEMENT, M1 | 29 June 1964 | 36 |
| TM
3-4940-200-24P (Sample PDF) |
ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR MECHANISM, VALVE REPLACEMENT, M1 | 25 April 1972 | 17 |
| TM
5-3895-366-24P (Sample PDF) |
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR SAW, CONCRETE, SELF PROPELLED, ABRASIVE DISK, MODEL C-3000-30 NSN 3895-01-303-8909 | 15 OCTOBER 1991 | 165 |
| TM
5-4940-200-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL SHOP EQUIPMENT, CONTACT MAINTENANCE, TRUCK MOUNTED, SET NO 3, (SOUTHWEST MODEL SECM) SERIAL NO. S-3-628 THROUGH S-3-720 AND (DAVEY MODEL CMU-5) SERIAL NO. 33343 THROUGH 33343-234 FSN 4940-294-9518 | AUGUST 1963 | 158 |
| TM
5-4940-200-25P (Sample PDF) |
ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT, AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST SHOP EQUIPMENT, CONTACT MAINTENANCE, TRUCK MOUNTED, SET NO. 3 (SOUTHWEST MODEL SECM) AND (DAVEY MODEL CMU-5) FSN 4940-294-9518 | 11 DECEMBER 1968 | 262 |
| TM
5-4940-200-35 (Sample PDF) |
FIELD AND DEPOT MAINTENANCE MANUAL SHOP EQUIPMENT, CONTACT MAINTENANCE, TRUCK MOUNTED, SET NUMBER 3 (SOUTHWEST MODEL SECM) SERIAL NO. S-3-628 THROUGH S-3-730 AND (DAVEY MODEL CMU-5) SERIAL NO. 33343 THROUGH 33343-234 FSN 4940-294-9518 | SEPTEMBER 1963 | 70 |
| TM
5-4940-225-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL SHOP EQUIPMENT, ORGANIZATIONAL REPAIR TRUCK MOUNTED (SOUTHWEST TRUCK BODY MODEI SEORL) FSN 4940-169-3041 (SOUTHWEST TRUCK BODY MODEL SEORLT) FSN 4940-164-4719 | 08 DECEMBER 1971 | 91 |
| TM
5-4940-225-20P (Sample PDF) |
ORGANIZATIONAL MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS SHOP EQUIPMENT, ORGANIZATIONAL REPAIR, TRUCK MOUNTED (SOUTHWEST TRUCK BODY MODEL SEORL) FSN 4940-169-3041 (SOUTHWEST TRUCK BODY MODEL SEORLT) FSN 4940-164-4719 | SEPTEMBER 1972 | 90 |
| TM
5-4940-225-34 (Sample PDF) |
DIRECT AND GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL SHOP EQUIPMENT, ORGANIZATIONAL REPAIR TRUCK MOUNTED (SOUTHWEST TRUCK BODY MODEL FSN 4940-169-3041 (SOUTHWEST TRUCK BODY MODEL FSN 4940-164-4719 | JANUARY 1972 | 58 |
| TM
5-4940-225-34P (Sample PDF) |
DIRECT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) SHOP EQUIPMENT, ORGANIZATIONAL REPAIR, TRUCK MOUNTED (SOUTHWEST TRUCK BODY MODEL SEORL) FSN 4940-169-3041 (SOUTHWEST TRUCK BODY MODEL SEORLT) FSN 4940-164-4719 | JULY 1972 | 160 |
| TM
5-4940-228-14 (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL SPRAY OUTFIT, PAINT MODEL 50-6609 NSN 4940-00-255-8683 | 22 JUNE 1979 | 85 |
| TM
5-4940-228-24P (Sample PDF) |
ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR SPRAY OUTFIT, PAINT NSN 4940-00-255-8683 | 10 NOVEMBER 1980 | 47 |
| TM
9-243 (Sample PDF) |
TECHNICAL MANUAL FOR USE AND CARE OF HAND TOOLS AND MEASURING TOOLS | DECEMBER 1983 | 326 |
| TM
9-3405-205-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, BAND METAL CUTTING Model S87 (DON G. JENNESS CO., INC.) (3405-00-294-9591) | NOVEMBER 1980 | 71 |
| TM
9-3405-206-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, BAND, METAL CUTTING, 14-IN (ROCKWELL INTERNATIONAL) (3405-00-409-0063) | APRIL 1978 | 38 |
| TM
9-3405-209-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, POWER HACK (DON G JENNESS CO, INC) (3405-00-729-3917) | MARCH 1978 | 13 |
| TM
9-3405-210-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, BAND, METAL CUTTING MODEL 2614-1 (DO ALL COMPANY) (NSN 3405-00-542-1328) | JULY 1981 | 179 |
| TM
9-3405-213-14&P (Sample PDF) |
Operator's, Organizational, Direct Support and General Support Maintenance Manual Including Repair Parts List For SAW, POWER HACK MODEL 1010 KASTO-RACINE INC. (NSN 3405-00-812-1593) | NOVEMBER 1981 | 37 |
| TM
9-3405-214-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, POWER HACK MODEL 3 HY DUTY (KELLER MANUFACTURING) (3405-00-729-3917) | NOVEMBER 1980 | 12 |
| TM
9-3405-215-14&P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, BAND, METAL CUTTING MODEL 3613-20 NSN 3405-00-351-9704 (DOALL COMPANY) | JULY 1981 | 164 |
| TM
9-3405-216-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SAW, BAND MODEL L-9 (NSN 3405-00-473-6430) W.F. Wells & Sons, Inc. | AUGUST 1982 | 54 |
| TM
9-3413-222-12 (Sample PDF) |
ORGANIZATIONAL MAINTENANCE MANUAL DRILLING MACHINE, UPRIGHT, FLOOR MOUNTED, 2 INCH DRILLING CAPACITY IN CAST IRON, 1 SPINDLE, NO. 4 MORSE TAPER SOCKET, 7 1/2 INCH SPINDLE TRAVEL, 11 INCHES FROM COLUMN TO CENTER OF SPINDLE, 8 SPEEDS 65 TO 1350, 3 HORSEPOWER, 220-VOLTS, 60-CYCLE, 3-PHASE (BUFFALO FORGE COMPANY MODEL 22 RC) (3413-517-1061) | APRIL 1965 | 31 |
| TM
9-3413-223-15P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DRILLING MACHINE, UPRIGHT BENCH MOUNTED, 1/4 IN. CAPACITY, 2-1/4 SPINDLE TRAVEL, 1/4 HP, 115 V, 60 C, SGLE-PH (HIGH SPEED HAMMER CO, MODEL R-53) (3413-221-8714) | OCTOBER 1969 | 24 |
| TM
9-3415-226-10 (Sample PDF) |
OPERATOR’S MANUAL GRINDING MACHINE, DRILL (BLACK DIAMOND SAW AND MACHINE WORKS, INC., MODEL DD2) (3415-517-1050) | JUNE 1965 | 16 |
| TM
9-3415-227-10 (Sample PDF) |
OPERATOR'S MANUAL BLACK DIAMOND PRECISION DRILL GRINDERS | DECEMBER 1966 | 20 |
| TM
9-3416-221-10 (Sample PDF) |
OPERATOR'S MANUAL LATHE, ENGINE, FLOOR MOUNTED, SLIDING BED GAP, 17 TO 28 IN. RATED SWING, 50 IN. OPEN AND 30 IN. CLOSED BETWEEN CENTERS, 5-HP, 208-440-V, 3-PH, 60-C (LEBLOND MACHINE TOOL COMPANY MODEL 17/28" REGAL) (3416-725-3508) AND LATHE, ENGINE, FLOOR MOUNTED, PLAIN BED GAP, 17 TO 26 IN. RATED SWING, 30 IN. BETWEEN CENTERS, 3-HP, 208-416-V, 3-PH, 50/60-C (LEBLOND MACHINE TOOL COMPANY MODEL 17" REGAL) (3416-828-3714) | MARCH 1965 | 97 |
| TM
9-3416-223-12 (Sample PDF) |
ORGANIZATIONAL MAINTENANCE MANUAL LATHE, ENGINE, BENCH MOUNTED, SOLID BED TYPE, 10-INCH SWING, NO. 2 MORSE TAPER CENTER, 1-3/8 SPINDLE HOLE, 110-VOLTS, 60-CYCLE, SINGLE PHASE 3/4-HORSEPOWER, W/ARMY DWG NO. 7550151 BENCH (SHELDON MACHINE CO. INC., MODEL XL) (3416-517-0955) | 2 JULY 1965 | 39 |
| TM
9-3416-225-12 (Sample PDF) |
ORGANIZATIONAL MAINTENANCE MANUAL LATHE, ENGINE, BENCH MOUNTED, SOLID BED TYPE, 10 INCH SWING, NO. 2 MORSE TAPER CENTER, 1-3/8 SPINDLE HOLE, 110-VOLTS, 60 CYCLE, SINGLE PHASE 3/4-HORSEPOWER, W/ARMY DWG NO. 7550151 BENCH (STANDARD-MODERN TOOL SERIES 2,000 MODEL 11 INCH) (3416-517-0955) | NOVEMBER 1965 | 38 |
| TM
9-3416-235-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LATHE, ENGINE: 9-INCH SWING MODEL CL 670Z (SOUTH BEND LATHE) (3416-00-235-0551) | DECEMBER 1980 | 66 |
| TM
9-3416-240-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LATHE, ENGINE MODEL B-40 (MC ILVANIE MACHINE WORKS) (NSN 3416-00-725-3508) | MAY 1981 | 41 |
| TM
9-3417-210-10 (Sample PDF) |
OPERATOR’S MANUAL MILLING MACHINE, RAM TYPE, SWIVEL HEAD PLAIN TABLE, POWER FEED, 1 1/2 HORSEPOWER 110-VOLT, 60-CYCLE, SINGLE-PHASE (VAN NORMAN MACHINE COMPANY MODELS IR-3-22 AND IRQ-3-22) (3417-624-4254) | MARCH 1967 | 25 |
| TM
9-3417-211-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR MILLING MACHINE MODELS 21-122-W/49-697 & 52-020 (NSN 3417-00-494-9573) (ROCKWELL INTERNATIONAL CORP.) | OCTOBER 1981 | 82 |
| TM
9-3417-213-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST) FOR MILLING MACHINE, VERTICAL MODEL 747VS (WELLS-INDEX CORPORATION) (NSN 3417-00-764-7993) | JULY 1981 | 59 |
| TM
9-3417-215-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS UST) FOR MILLING MACHINE MODEL NO. 4 (BURKE DIVISION POWERMATIC/HOUDAILLE, INC.) (NSN 3417-00-357-1948) | JULY 1981 | 23 |
| TM
9-3418-200-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL FOR SHAPER, METAL CUTTING, HORIZONTAL MODEL CS100 (SOUTH BEND LATHE) (NSN 3418-00-223-0969) | FEBRUARY 1982 | 43 |
| TM
9-3418-201-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SHAPER, METAL CUTTING HORIZONTAL NSN 3418-00-808-0475 (ROCKFORD MACHINE TOOL CO.) | JULY 1981 | 74 |
| TM
9-3418-204-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SHAPER NSN 3418-00-412-4506 (MITTS & MERRILL INC.) | JUNE 1981 | 36 |
| TM
9-3419-224-10 (Sample PDF) |
Operator's Manual SAW, BAND, METAL CUTTING (BOICE-CRANE CO. MODEL 2325) (3419-222-1330) | JUNE 1965 | 51 |
| TM
9-3419-225-10 (Sample PDF) |
OPERATOR’S MANUAL HONING MACHINE HORIZONTAL BENCH MOUNTING 0.480 TO 3.000 INCH WORKING CAPACITY RANGE, 1 SPINDLE, 1/3 HORSEPOWER AC, 115-VOLT 60 CYCLE SINGLE PHASE (AMMCO TOOLS INC. MODEL 2500) (3419-812-1591) | MAY 1965 | 29 |
| TM
9-3419-227-10 (Sample PDF) |
OPERATOR'S MANUAL SAW, BAND, METAL CUTTING, FLOOR MOUNTING, 16 INCH THROAT DEPTH, SAW BLADE OR FILE BAND, 24 X 24 TABLE ANGLE ADJUSTING, 208-VOLT, 60-CYCLE 3-PHASE (DO ALL COMPANY MODEL 1612-OM) (3419-294-9591) | JANUARY 1966 | 68 |
| TM
9-3419-228-10 (Sample PDF) |
OPERATOR’S MANUAL SAW, BAND, METAL CUTTING FLOOR MOUNTING, 26 INCH THROAT DEPTH 26x26 WORK TABLE, TILT TYPE TABLE 220-VOLT, 60 CYCLE, 3 PHASE W/INTEGRAL BUTT WELDER (DoALL COMPANY, MODEL 2612-1M) (3419-542-1328) | DECEMBER 1966 | 66 |
| TM
9-3444-203-10 (Sample PDF) |
OPERATOR’S MANUAL FOR PRESS, ARBOR, HAND OPERATED (ACCO EQUIPMENT DIVISION OF AMERICAN CHAIN AND CABLE CO. MODELS P-994 AND P-995) (344-449-7295) | OCTOBER 1964 | 16 |
| TM
9-3445-102-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SHEARING MACHINE, METAL-SQUARING MODEL NOS. 132, 137, 142 and 152 (PECK, STOW, AND WILCOX CO., INC) (NSN 3445-00-239-0706) | APRIL 1980 | 19 |
| TM
9-3445-106-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SHEARING MACHINE MODEL 10-U-8 (NSN 3445-00-277-9100) | APRIL 1983 | 48 |
| TM
9-3445-465-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SHEARING MACHINE (NSN 3445-00-277-9100) LODGE AND SHIPLEY CO. | JULY 1981 | 84 |
| TM
9-3465-200-10 (Sample PDF) |
OPERATOR’S MANUAL FIXTURE, LATHE, METAL CUTTING FOR DIAMETER ROUND OR 2 INCH SQUARE 360 DEGREE INDEX RING, 2 INCH STOCK, 12-1/2 HIGH, 5 WIDE, 3-7/8 VERTICAL TRAVEL (NUMERIC PRODUCTS COMPANY MODEL 312) (3465-022-8817) | 29 November 1967 | 28 |
| TM
9-3465-201-10 (Sample PDF) |
OPERATOR’S MANUAL FIXTURE, LATHE, METAL CUTTlNG FOR 2 INCH DIAMETER ROUND OR 2 INCH SQUARE STOCK, 360 DEGREE INDEX RING, 12 ½ HIGH, 5 WIDE, 3 7/8 VERTICAL TRAVEL (DUMORE COMPANY MODEL 8349) | 25 March 1968 | 16 |
| TM
9-4910-261-14P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR JACK, DOLLY-TYPE, HYDRAULIC: 10-TON CAPACITY (WALKER MFG. CO. MODEL-780) (4910-289-7233) | 14 October 1971 | 24 |
| TM
9-4910-262-14 (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL, (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR JACK, DOLLY-TYPE, HYDRAULIC: 16-INCH-LIFT, TWO-SPEED, 10-TON-CAPACITY (WEAVER DIVISION OF DURA CORPORATION MODEL NO. WA-75-A) (4910-289-7233) | 21 December 1971 | 52 |
| TM
9-4910-387-14-1 (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL, VOLUME I FOR TESTER, FUEL INJECTOR PUMP: SINGLE END DRIVE, 150 TO 3600 RPM (4910-01-037-9417) AND ADAPTER KITS, FUEL INJECTOR: AMERICAN BOSCH APE-6BB (4910-01-005-2850), AMERICAN BOSCH PSB-6A AND PSB-12BT (4910-01-005-2851), AMERICAN BOSCH PSB-12BT (4910-01-005-2852), SIMMONDS SU (4910-01-005-2853), INTERNATIONAL HARVESTER 3200 (4910-01-006-3073), AMERICAN BOSCH PSJ-6A (4910-01-006-3072), CATERPILLAR (4910-01-005-2854), ROOSA MASTER (4910-01-005-2855), AND CUMMINS (4910-00-763-7495) | MAY 1982 | 359 |
| TM
9-4910-387-14-2 (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL, VOLUME II FOR TESTER, FUEL INJECTOR PUMP: SINGLE END DRIVE, 150 TO 3600 RPM (4910-01-037-9417) AND ADAPTER KITS, FUEL INJECTOR: AMERICAN BOSCH APE-6BB (4910-01-005-2850), AMERICAN BOSCH PSB-6A AND PSB-12BT (4910-01-005-2851), AMERICAN BOSCH PSB-12BT (4910-01-005-2852), SIMMONDS SU (4910-01-005-2853), INTERNATIONAL HARVESTER 3200 (4910-01-006-3073), AMERICAN BOSCH PSJ-6A (4910-01-006-3072), CATERPILLAR (4910-01-005-2854), ROOSA MASTER (4910-01-005-2855), AND CUMMINS (4910-00-763-7495) | AUGUST 1982 | 666 |
| TM
9-4910-389-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR CLEANER AND TESTER, SPARKPLUG: BENCH MOUNTED (CHAMPION SPARK PLUG CO., MODEL 800) (JAT INDUSTRIES, MODEL JAT5000) (THE OILJAK MFG. CO. INC., MODEL B800M) (THE VP COMPANY, MODEL VP500) (4910-261-5868) | JULY 1972 | 52 |
| TM
9-4910-409-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOL LISTS) TESTER DIESEL FUEL INJECTOR NOZZLE (BACHARACH INDUSTRIAL INSTRUMENT COMPANY MODEL YFL) (4910-255-8641) WITH CONNECTOR SET 44 (BACHARACH PART NUMBER 65-275) (4910-955-5517) AND CONNECTOR SET (ORD DWG B11020498) (4910-955-5516) | OCTOBER 1963 | 44 |
| TM
9-4910-410-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOL LISTS) TESTER, ENGINE DISTRIBUTOR, BENCH-TYPE, 6, 12, AND 24-VOLT DISTRIBUTORS, SINGLE-PHASE. 60-CYCLE, 115-VOLT (SUN ELECTRIC CORPORATION MODEL PDT-5) (4910-392-2939) | 13 JANUARY 1964 | 52 |
| TM
9-4910-420-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOL LISTS) TESTER, ENGINE DISTRIBUTOR. BENCH-TYPE, 6, 12, AND 24-VOLT DISTRIBUTORS, SINGLE-PHASE 60-CYCLE, 115-VOLT (HEYER PRODUCTS COMPMANY INC., MODEL 168) (4910-392-2939) | 30 SEPTEMBER 1963 | 54 |
| TM
9-4910-422-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL KIT, SPARK PLUG CLEANING AC SPARK PLUG DIVISION OF GENERAL MOTORS NO. 5612478, TYPE TK-2 FSN 4910-786-9271 | JUNE 1964 | 45 |
| TM
9-4910-428-10 (Sample PDF) |
OPERATOR’S MANUAL GRINDING MACHINE, VALVE FACE (K. O. LEE MODEL K403 CM) (4910-540-4679) | 2 September 1964 | 18 |
| TM
9-4910-430-10 (Sample PDF) |
OPERATOR’S MANUAL TESTER CYLINDER COMPRESSION (BACHARACH INDUSTRIAL INSTRUMENT CO., MODEL YUF) (4910-808-4300) | 11 June 1965 | 16 |
| TM
9-4910-432-10 (Sample PDF) |
OPERATOR’S MANUAL GRINDING KIT, VALVE SEAT, ELECTRIC 35 DEGREE ANGLE TYPE CONCENTRIC DRIVE, 1/4 HORSEPOWER, AC/DC, SINGLE PHASE, 115-VOLT, 14000 RPM RATED NO LOAD SPEED (K. O. LEE COMPANY MODEL P300BB) (4910-060-9983) AND (K. O. LEE COMPANY MODEL P300BB-M2) (4910-473-6437) | 25 FEBRUARY 1965 | 30 |
| TM
9-4910-436-10 (Sample PDF) |
OPERATOR’S MANUAL GRINDING KIT, VALVE SEAT, ELECTRIC, CONCENTRIC DRIVE, 7500 RPM RATED NO LOAD SPEED, 115-VOLT, AC/DC, SHIELDED TO PREVENT RADIO INTERFERENCE (ALBERTSON AND CO. MODEL 1712-S) (4910-473-6437) | 16 DECEMBER 1964 | 27 |
| TM
9-4910-437-10 (Sample PDF) |
OPERATOR'S MANUAL BORING MACHINE, ENGINE CYLINDER (ROTTLER BORING BAR COMPANY, MODEL NO. DA-1H) (4910-473-6361) | NOVEMBER 1964 | 32 |
| TM
9-4910-441-10 (Sample PDF) |
OPERATOR'S MANUAL BORING MACHINE, ENGINE CYLINDER (ROTTLER BORING BAR CO., MODEL DA-4) (4910-223-9734) | JANUARY 1965 | 35 |
| TM
9-4910-445-10 (Sample PDF) |
OPERATOR'S MANUAL LATHE BRAKE DRUM, FLOOR MOUNTED, 60-INCH RATED SWING, 9-TO-25-INCH DRUM DIAMETER, 10-INCH MAXIMUM CUTTING DEPTH, STATIONARY CUTTING TOOL TYPE, WITH GRINDING, PROVISIONS, 1-HORSEPOWER DRIVE MOTOR, AC, 115-VOLT, 60-CYCLE, SINGLE PHASE, 1/2-HORSEPOWER GRINDING MOTOR, AC, 115-VOLT, 60-CYCLE, SINGLE PHASE (AMMCO TOOLS, INC MODEL 7700-7) (4910-516-6192) | JUNE 1965 | 49 |
| TM
9-4910-446-10 (Sample PDF) |
OPERATOR'S MANUAL LATHE, BRAKE DRUM, FLOOR MOUNTED, 60 INCH RATED SWING, 25 INCH MAXIMUM DRUM DIAMETER, W/GRINDING PROVISIONS, 1 HORSEPOWER DRIVE MOTOR, 1/2 HORSEPOWER GRINDING MOTOR, 115-VOLT, 60-CYCLE, SINGLE-PHASE (STAR MACHINE AND TOOL COMPANY MODEL 1960) (4910-516-6192) | MAY 1965 | 26 |
| TM
9-4910-448-10 (Sample PDF) |
OPERATOR’S MANUAL INCLUDING BASIC ISSUE ITEMS LIST TEST SET, GENERATOR AND VOLTAGE REGULATOR, AUTOMOTIVE (ALLEN ELECTRIC AND EQUIPMENT CO. MODEL 30-82) (4910-270-3780) | APRIL 1965 | 26 |
| TM
9-4910-452-10 (Sample PDF) |
OPERATOR'S MANUAL LATHE, BRAKE DRUM, FLOOR MOUNTED, 60-INCH RATED SWING, 9-TO 25-INCH DRUM DIAMETER, 10-INCH MAXIMUM CUTTING DEPTH, STATIONARY CUTTING TOOL TYPE, 1/2-HP, AC, 10/220-VOLT, 60-CYCLE, SINGLE PHASE (LEMPCO PRODUCTS, INC. MODEL 802) (4910-516-6192) | SEPTEMBER 1965 | 28 |
| TM
9-4910-453-10 (Sample PDF) |
OPERATOR'S MANUAL GRINDING KIT, VALVE SEAT, ELECTRIC, 35 DEGREE ANGLE CONCENTRIC DRIVE DRIVER, AC/DC, 115-VOLT 7,500 RPM RATED NO LOAD SPEED (ALBERTSON AND COMPANY MODEL 1712-M) (4910-060-9983) | JUNE 1965 | 22 |
| TM
9-4910-454-10 (Sample PDF) |
OPERATOR'S MANUAL KIT, SPARK PLUG CLEANING (ALLEN ELECTRIC AND EQUIPMENT CO., MODEL 30-99) (4910-786-9271) | JULY 1965 | 18 |
| TM
9-4910-456-14 (Sample PDF) |
OPERATOR, 0RGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL, (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) TEST SET, GENERATOR AND VOLTAGE REGULATOR AUTOMOTIVE: 12-AND 24-VOLT SYSTEMS (ALLEN ELECTRIC AND EQUIPMENT COMPANY MODEL NO. 30-92) (4910-092-9136) | 15 0CTOBER 1971 | 139 |
| TM
9-4910-458-12 (Sample PDF) |
OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOL LISTS) TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR, AND STARTER, FLOOR MOUNTED, 10 TO 50-V, 500-AMP, DC, AND 25 TO 50-V, 100 TO 400 AMP, AC, TESTING RANGES, W/800 TO 11,000-RPM, 22½-HP, 220/440-V, 60-C, 3-PH DUAL HEAD VARIDRIVE ASSEMBLY (UNITED MANUFACTURING COMPANY MODEL AGARTS, TYPE II, PART NUMBER 7336-1, MODEL AGARTS, TYPE II, PART NUMBER 7336-2 AND MODEL AGARTS, TYPE II, PART NUMBER 7336-3 (4910-767-0218) AND TYPE II, PART NUMBER 7336 (4910-316-5252)) | 1 NOVEMBER 1966 | 204 |
| TM
9-4910-458-35P (Sample PDF) |
DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR, AND STARTER (UNITED MANUFACTURING COMPANY MODEL AGART TYPE II PART NUMBER 7336 (4910-316-5252) AND PART NUMBERS 7336-1, 7336-2, AND 7336-3 (4910-767-0218)) | 28 DECEMBER 1967 | 121 |
| TM
9-4910-459-10 (Sample PDF) |
OPERATOR'S MANUAL BORING MACHINE, ENGINE CYLINDER, PORTABLE, 3 1/2 TO 7 1/2 BORE DIAMETER, 18 INCH DEPTH OF BORE, 110-VOLT, 60-CYCLE, SINGLE-PHASE (CEDAR RAPIDS ENGINEERING COMPANY MODEL FL) (4910-223-9734) | NOVEMBER 1965 | 29 |
| TM
9-4910-463-10 (Sample PDF) |
OPERATOR’S MANUAL TESTER, ENGINE DISTRIBUTOR, BENCH TYPE, 115-VOLTS, 60-CYCLE, SINGLE-PHASE, FOR TESTING 6, 12, AND 24-VOLT DISTRIBUTORS (ALLEN ELECTRIC AND EQUIPMENT COMPANY MODEL 30-89) (4910-392-2939) | JANUARY 1966 | 22 |
| TM
9-4910-472-10 (Sample PDF) |
OPERATOR'S MANUAL TEST SET, GENERATOR AND VOLTAGE REGULATOR, AUTOMOTIVE: 6, 12, AND 24 VOLT SYSTEMS (SUN ELECTRIC CORP., MODEL NO. VAT-25) (4910-270.3780) | AUGUST 1966 | 30 |
| TM
9-4910-473-10 (Sample PDF) |
OPERATOR'S MANUAL GRINDING MACHINE, VALVE FACE (CEDAR RAPIDS ENG, CO. KWIK-WAY MODEL VL) FSN 4910-765-6358 | JULY 1966 | 25 |
| TM
9-4910-477-10 (Sample PDF) |
OPERATOR’S MANUAL TESTER, INTERNAL COMBUSTION ENGINE, VACUUM AND PUMP PRESSURE, 0 TO 8 LBS PRESSURE AND 0 TO 27 INCHES VACUUM (CENTURY TOOL COMPANY MODEL 27-12) (4910-55-8673) | 30 DECEMBER 1966 | 20 |
| TM
9-4910-484-10 (Sample PDF) |
Operator’s Manual GRINDING MACHINE, VALVE FACE, BENCH MOUNTING, 9/32 INCH TO 11/16 INCH CHUCK, O TO 45 DEGREE VALVE FACE ANGLE ADJUSTMENT, 115-VOLT, AC/DC, 60-CYCLE, SINGLE PHASE (CEDAR RAPIDS MODEL “KWIK-WAY” KK) (4910-540-4679) | 29 November 1972 | 19 |
| TM
9-4910-485-12 (Sample PDF) |
TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR AND STARTER, FLOOR MOUNTED, 10 TO 50-V, 500-AMP DC (SUN ELECTRIC CORPORATION MODEL AGT-9 AND AGT-9A) (4910-767-0218) | 22 MAY 1970 | 126 |
| TM
9-4910-485-34P (Sample PDF) |
DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR AND STARTER, FLOOR MOUNTED, 10 TO 50-V, 500-AMP DC (SUN ELECTRIC CORPORATION MODEL AGT-9 AND AGT-9A) (4910-767-0218) | 7 DECEMBER 1971 | 44 |
| TM
9-4910-487-10 (Sample PDF) |
OPERATOR'S MANUAL GRINDING MACHINE, CYLINDER HEAD (CEDAR RAPIDS ENGINEERING MODEL 860) FSN 4910-889-2051 | FEBRUARY 1969 | 30 |
| TM
9-4910-488-10 (Sample PDF) |
OPERATOR’S MANUAL TEST SET, IGNITION COIL CAPACITOR RESISTOR SUN ELECTRIC CORP. (MODEL CCT-20) (4910-300-1305) | 23 June 1969 | 18 |
| TM
9-4910-489-10 (Sample PDF) |
OPERATOR'S MANUAL TEST SET GENERATOR AND VOLTAGE REGULATOR, AUTOMOTIVE 12- AND 24-VOLT SYSTEMS (SUN ELECTRIC MODEL LVR-3A) (4910-092-9136) | 22 May 1969 | 22 |
| TM
9-4910-491-15P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOL LISTS FOR SPREADER, TIRE, AIR OPERATED, PEDESTAL TYPE, WITH TIRE HOIST, 12 TO 28 INCH BEAD DIAMETER RANGE, 3.30 TO 14.00 INCH MAXIMUM CROSS SECTION (BRANICK MODEL FS/eF) (4910-190-5244) | 21 May 1970 | 25 |
| TM
9-4910-509-10 (Sample PDF) |
OPERATOR'S MANUAL FOR LOW VOLTAGE CIRCUIT TESTERS | 1 APRIL 1975 | 71 |
| TM
9-4910-579-14&P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BORING MACHINE, ENGINE CYLINDER (MODEL FN) (KWIK-WAY MFG. CO.) (NSN 4910-00-473-6361) | MAY 1980 | 51 |
| TM
9-4910-582-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, CYLINDER MODEL 2093A (STEWART-THOMAS INDUSTRIES INC.) (NSN 4910-00-250-2423) | SEPTEMBER 1980 | 22 |
| TM
9-4910-585-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST F O R LIGHT, IGNITION TIMING (MAGNETO) MODEL NO. 235 (AUTO TEST) (NSN 4910-00-255-1449) | NOVEMBER 1981 | 22 |
| TM
9-4910-586-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDlNG REPAIR PARTS LIST) FOR STAND, TRANSPORT, ENGINE (NSN 4910-00-338-6673) | DECEMBER 1979 | 24 |
| TM
9-4910-587-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR HOIST UNIT, AUTOMOTIVE MAINTENANCE (NEAL MACHINE CORPORATION) (4910-00-448-0254) | APRIL 1978 | 24 |
| TM
9-4910-590-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR GRINDING KIT, VALVE SEAT, ELECTRIC, NO. 6335 NSN 4910-00-473-6437 | 31 OCTOBER 1980 | 23 |
| TM
9-4910-595-14&P (Sample PDF) |
Operator's, Organizational, Direct Support and General Support Maintenance Manual Including Repair Parts List for BEAD BREAKER, PNEUMATIC TIRE (STANDARD WHEEL AND RIM CO.) (NSN 4910-00-773-9341) | NOVEMBER 1980 | 18 |
| TM
9-4910-600-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR GRINDING KIT, VALVE SEAT (K O LEE CO, INC) (4910-00-060-9983) | APRIL 1978 | 62 |
| TM
9-4910-604-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TEST SET, DIESEL INJECTOR (BACHARACH INSTRUMENT COMPANY) (NSN 4910-00-317-8265) | OCTOBER 1981 | 32 |
| TM
9-4910-607-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR ADAPTER SET, ENGINE, ELECTRICTEST (SUN ELECTRIC CORPORATiON) (4910-00-348-7600) | APRIL 1978 | 21 |
| TM
9-4910-609-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR MAINTENANCE FIXTURE, MODEL RM-77 NSN 4910-00-357-1874 (HYDRAULICS NTERNATIONAL, INC.) | J U L Y 1 9 8 1 | 36 |
| TM
9-4910-610-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, COMPRESSION (KIENE DIESEL ACCESSORIES, INC) (4910-00-808-4300) | DECEMBER 1977 | 16 |
| TM
9-4910-611-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PART LIST FOR TEST SET, INJECTOR (BACHARACH INSTRUMENT COMPANY) (4910-00-355-6248) MODEL YHQ | MARCH 1978 | 10 |
| TM
9-4910-617-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST) FOR TABLE, WORK, MODEL 7225 (NSN 4910-00-205-3046) (RUST MANUFACTURING, INC.) | 18 November 1981 | 16 |
| TM
9-4910-622-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR DISTRIBUTOR TESTER, ENGINE MODEL PDT-5D (SUN ELECTRIC CORPORATION) (NSN 4910-00-392-2939) | DECEMBER 1980 | 40 |
| TM
9-4910-623-14&P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, DIESEL INJECTOR NOZZLE MODEL DT-1300/7008 (KIENE DIESEL ACCESSORIES, INC.) (NSN 4910-00-255-8641) | MAY 1980 | 38 |
| TM
9-4910-626-14&P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LIFT, TRANSMISSION AND DIFFERENTIAL MODEL 24-51404-4 (AUTO SPECIALTIES MFG. CO.) (NSN 4910-00-585-3622) | 22 MAY 1981 | 11 |
| TM
9-4910-630-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR RELINER, BRAKE AND CLUTCH MODEL 501G (METAL-NAX SALES DIVISION) (NSN 4910-00-173-5310) | MAY 1980 | 28 |
| TM
9-4910-631-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR CLEANER & TESTER, SPARK PLUG MODEL 82 (BANNER METALS) (4910-00-261-5868) | JANUARY 1981 | 28 |
| TM
9-4910-638-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BORING MACHINE, ENGINE CYLINDER MODEL FL (NSN 4910-00-223-9734) (KWIK-WAY MANUFACTURING CO.) | AUGUST 1981 | 59 |
| TM
9-4910-641-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR GRINDING MACHINE, VALVE FACE MODEL K403C and K500C (K.O. LEE CO.) (NSN 4910-00-540-4679) | 15 MAY 1980 | 51 |
| TM
9-4910-644-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INLCUDING REPAIR PARTS LIST) FOR LIGHT, IGNITION TIMING PN 7710 (HYDRAULIC TECHNOLOGY, INC.) (NSN 4910-00-255-1449) | JULY 1981 | 19 |
| TM
9-4910-663-12 (Sample PDF) |
OPERATOR’S AND 0RGANIZATIONAL MAINTENANCE MANUAL TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR, STARTER AND ASSOCIATED EQUIPMENT MODEL GASR-500, PART NUMBER 7458-2 (NSN 4910-01-041-8161) | 10 JUNE 1981 | 125 |
| TM
9-4910-663-24P (Sample PDF) |
ORGANIZATIONAL, DIRECT SUPPORT, AND MAINTENANCE GENERAL SUPPORT MAINTENANCE PARTS AND SPECIAL TOOLS LIST FOR TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR, STARTER, AND ASSOCIATED EQUIPMENT MODEL GASR-500 PART NUMBER 7458-2 7458-4 N S 4910-01-041-8161 4910-00-767-0218 | 29 MAY 1987 | 89 |
| TM
9-4910-663-34 (Sample PDF) |
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR, STARTER,AND ASSOCIATED EQUIPMENT, MODEL GASR-500 PART NUMBER NSN 7458-2 4910-01-041-8161 7458-4 4910-00-767-0218 | 15 JUNE 1981 | 164 |
| TM
9-4910-677-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, INTERNAL COMBUSTION ENGINE MODEL 27-12 (CENTURY TOOL COMPANY, INC.) ( NSN 4910-00-255-8673 ) | MAY 1980 | 24 |
| TM
9-4910-679-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR GRINDING KIT, VALVE SEAT ELECTRIC NO. 6335-69 (BLACK AND DECKER MFG. CO.) (NSN 4910-00-060-9983) | AUGUST 1981 | 19 |
| TM
9-4910-683-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST) FOR LATHE, BRAKE MODEL 1476 (STAR MACHINE & TOOL COMPANY) (NSN 4910-01-028-9849) | SEPTEMBER 1981 | 32 |
| TM
9-4910-687-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST SPREADER, TIRE TYPE I, STYLE A, SIZE I (NSN 4910-00-725-0326) (BRANICK RETREAD DIV., APPLIED POWER, INC.) | FEBRUARY 1983 | 20 |
| TM
9-4910-692-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR STAND, RADIATOR TEST AND REPAIR MODEL E60B NSN 4910-00-505-4786 INLAND MANUFACTURING CO. | JULY 1981 | 21 |
| TM
9-4910-695-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST F O R LIGHT, IGNITION MKB MANUFACTURING CORPORATION (NSN 4910-00-255-1449) | APRIL 1981 | 22 |
| TM
9-4910-696-14&P (Sample PDF) |
OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LIGHT, IGNITION TIMING MKB MANUFACTURING CORPORATION (NSN 4910-00-937-5724) | APRIL 1981 | 26 |
| TM
9-4910-698-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TEST SET, DIESEL MODEL DT-1300 KIENE DIESEL ACCESSORIES, INC. (NSN 4910-00-317-8265) | APRIL 1981 | 17 |
| TM
9-4910-700-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL., DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL lNCLUDING REPAIR PARTS LIST FOR TEST SET, TACHOMETER, DWELL (AUL INSTRUMENTS, INC.) (NSN 4910-00-788-8549) | JUNE 1981 | 40 |
| TM
9-4910-701-14&P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR JACK, DOLLY TYPE, HYDRAULIC MODEL GH-G (HEIN-WERNER CORP.) (NSN 4910-00-516-5806) | JUNE 1981 | 20 |
| TM
9-4910-703-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR ADAPTER SET, ENGINE MODEL 501-0 HANDY TOOL AND MFG. CO., INC. (NSN 4910-00-348-7600) | APRIL 1981 | 20 |
| TM
9-4910-706-14&P (Sample PDF) |
OPERATOR’S, ORGANlZTIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LEAK EXPOSER MODELS 17 AND 20 (INLAND MANUFACTURING CO.) (NSN 4910-00-075-2394) | MAY 1981 | 26 |
| TM
9-4910-707-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL PARTS LIST FOR INCLUDING REPAIR MOUNTER-DEMOUNTER MODEL 931A (NSN 4910-00-675-1478) | 18 APRIL 1983 | 52 |
| TM
9-4910-709-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST F O R FILLER AND BLEEDER MODEL T3401GVT-01 (EIS DIVISION-PARKER HANNIFIN (NSN 4910-00-273-3658) | SEPTEMBER 1981 | 20 |
| TM
9-4910-710-14&P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TRUCK LIFT, WHEEL MODEL 80-G (HEIN-WERNER CORP.) (NSN 4910-00-554-5983) | APRIL 1981 | 22 |
| TM
9-4910-714-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR STAND, ENGINE TRANSPORT MODEL MTM-6325 (4910-00-338-6673) | MARCH 1983 | 26 |
| TM
9-4910-719-14&P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST BEAD BREAKER, PNEUMATIC MODEL IMT 200HP (IOWA MOLD TOOLING CO., INC.) (NSN 4910-01-015-7667) | JANUARY 1982 | 34 |
| TM
9-4910-720-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LIFT, TRUCK MODEL RMI-R3 (RUST MANUFACTURING COMPANY) (NSN 4910-00-554-5983) | APRIL 1981 | 20 |
| TM
9-4910-726-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, HYDRAULIC MODEL PHT-100-6-G418-1 NSN 4910-00-868-6871 (SCHROEDER BROS. CORP.) | JUNE 1981 | 14 |
| TM
9-4910-730-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, ENGINE DISTRIBUTOR PART NO. 7808 NSN 4910-00-392-2939 | MARCH 1983 | 36 |
| TM
9-4910-733-14&P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR JACK, DOLLY HYDRAULIC MODEL WA-75B (WEAVER JACK CORPORATION) (NSN 4910-00-289-7233) | 22 APRIL 1983 | 15 |
| TM
9-4910-736-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR IGNITION COIL - CAPACITOR TESTER MODEL NUMBER 403 (4910-00-300-1305) | FEBRUARY 1984 | 150 |
| TM
9-4910-743-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BALANCER, VEHICLE WHEEL MODEL M-76 (NSN 4910-01-093-0167) | MAY 1984 | 23 |
| TM
9-4910-749-10 (Sample PDF) |
OPERATOR’S MANUAL FOR TEST SET, TACHOMETER DWELL (NSN 4910-00-788-8549) McGRAW COMMERCIAL EQUIPMENT COMPANY, INC. | MARCH 1984 | 15 |
| TM
9-4940-205-20P (Sample PDF) |
ORGANIZATIONAL MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR GUN, SPRAY, PAINT (BINKS MFG CO. MODELS 17, 18, and 19) (PRESSURE FEED (7 CU FT 4940-261-8413)) (SIPHON FEED (4-1 /2 CU FT 4940-261-8414)) (SIPHON FEED (7 CU FT 4940-261-8415)) | 6 November 1969 | 12 |
| TM
9-4940-221-20P (Sample PDF) |
ORGANIZATIONAL MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR GUN, SPRAY, PAINT (DEVIL BISS MFG CO.) PMBC 510-58FX, PMBC 5010–45E, AND PMBC 510–58E (PRESSURE FEED (7 CU FT 4940-261-8413)) (SIPHON FEED (4 1/2 CU FT 4940-261-8414)) (SIPHON FEED (7 CU FT 4940-261-841 5)) | 21 November 1969 | 10 |
| TM
9-4940-324-34P (Sample PDF) |
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR CLEANER, STEAM, PRESSURE JET, WHEEL MOUNTED: KEROSENE OR LIGHT FUEL OIL FIRED, ELECTRIC MOTOR, 1-HP, 115-V, AC, 60-C, SGLE-PH (HOMESTEAD VALVE MANUFACTURING COMPANY MODEL RI-1600C) (4940-351-2927) | 23 JUNE 1971 | 40 |
| TM
9-4940-342-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATION, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) CLEANER, STEAM, PRESSURE JET: OIL FIRED, SKID MOUNTED, 600 GALLONS PER HOUR CAPACITY (AMERICAN KLEANER MFG. CO. INC., MODEL 6000-OM) (4920-00-473-6218) | 28 FEBRUARY 1975 | 174 |
| TM
9-4940-348-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY OUTFIT, PRESSURE TANK MODEL 98-305 NATIONAL STOCK NO. 4940-00-650-7819 | DECEMBER 1979 | 21 |
| TM
9-4940-400-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, DIELECTRIC MODEL A-100-2G (SKARSHAUG TESTING LABORATORY, INC.) (NSN 4940-00-077-1990) | MAY 1981 | 44 |
| TM
9-4940-403-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TEST STAND, ROTARY ACTUATOR, MODEL NO. BDL-812121 NATIONAL STOCK NUMBER 4940-00-152-2107 (BARKLEY & DEXTER LABORATORIES, INC.) | AUGUST 1981 | 56 |
| TM
9-4940-405-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY OUTFIT, UNDERCOATING, MODEL 98-1030 (BINKS MANUFACTURING CO.) (NSN 4940-00-449-6789) | NOVEMBER 1979 | 21 |
| TM
9-4940-409-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR UNDER CUTTER ARMATURE MODEL #7 NSN 4940-00-270-1594 HULLHORST TOOLS | AUGUST 1981 | 20 |
| TM
9-4940-411-14&P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TANK, PRESSURE MODEL ASME-A-3 (PAASCHE AIR BRUSH CO.) (NSN 4940-00-251-6478) | MAY 1980 | 13 |
| TM
9-4940-415-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY OUTFIT, PAINT (NSN 4940-00-294-9521) MODEL 50-6525 | OCTOBER 1981 | 17 |
| TM
9-4940-420-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR GUN, CLEANING, PNEUMATIC, MODEL 140B2 (NSN 4940-00-910-2687) | DECEMBER 1979 | 20 |
| TM
9-4940-421-14 (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL SHOP EQUIPMENT CONTACT MAINTENANCE TRUCK MOUNTED (SOUTHWEST MODEL SECM) SERIAL NO. RANGE SECM 1001 THRU SECM 2532 NSN 4940-01-016-2262 | 15 OCTOBER 1977 | 111 |
| TM
9-4940-421-24P (Sample PDF) |
ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT REPAIR PARTS AND SPECIAL TOOLS LIST SHOP EQUIPMENT CONTACT MAINTENANCE TRUCK MOUNTED (SOUTHWEST MODEL SECM) SERIAL NO. RANGE SECM 1001 THRU SECM 2532 (4940-01-016-2262) | 10 MAY 1978 | 142 |
| TM
9-4940-424-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY GUN, PAINT MODELS B-9900, B-9900-B NSN 4940-00-261-8415 (METALCRAFT, INC.) | OCTOBER 1980 | 22 |
| TM
9-4940-427-14&P (Sample PDF) |
OPERATOR’S , ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SEPARATOR, OIL AND WATER MODEL 303C (SHARPE MFG. CO.) (4940-00-242-4101) | 31 OCTOBER 1980 | 13 |
| TM
9-4940-428-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY OUTFIT, PAINT, MODEL 50-6519 (ECLIPSE SYSTEMS, INC) (4940-00-857-2290) | APRIL1978 | 13 |
| TM
9-4940-438-14&P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SEPARATOR, OIL AND WATER MODEL 98-305 (ECLIPSE SYSTEMS, INC.) (NSN 4940-00-242-4100) | MAY 1980 | 20 |
| TM
9-4940-444-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BLAST CLEANING MACHINE WITH DUST COLLECTOR MODEL NO. 70AC (WHEELABRATOR-FRYE INC.) (NSN 4940-00-300-1314) | NOVEMBER 1981 | 115 |
| TM
9-4940-446-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SEPARATOR, OIL AND WATER MODEL P/N 50-6655 (ECLIPSE SYSTEMS, INC.) (NSN 4940-00-242-4101) | 18 DECEMBER 1980 | 13 |
| TM
9-4940-452-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST F O R SPRAY GUN, PAINT MODEL 9700-A (METALCRAFT, INC.) (NSN 4940-00-261-8413) | APRIL 1980 | 25 |
| TM
9-4940-455-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT IUIID GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST F O R TANK, PRESSURE, AIR, PORTABLE (STEWART-THOMAS INDUSTRIES, INC) (NSN 4940-00-508-6354) MODEL K325 | JANUARY 1980 | 11 |
| TM
9-4940-456-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY GUN, PAINT (SHARPE MANUFACTURING CO) (4940-00-261-8413) | APRIL 1978 | 20 |
| TM
9-4940-461-15P (Sample PDF) |
OPERATOR’S ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR SEPARATOR, OIL AND WATER, SPRAY GUN, WALL MTD (GRAY CO, INC, MODELS 250-751 AND 250-432) (4940-242-4100) | 4 FEBRUARY 1970 | 12 |
| TM
9-4940-462-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR LATHE, ARMATURE AND UNDERCUTTER MODEL B-10 (FRANK N. WOOD CORPORATION) (NSN 4940-00-263-3077) | MARCH 1983 | 26 |
| TM
9-4940-469-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TANK, PRESSURE FEED MODEL 50-6523 (ECLIPSE SYSTEMS, INC.) (NSN 4940-00-542-4846) | OCTOBER 1980 | 20 |
| TM
9-4940-474-10 (Sample PDF) |
OPERATOR’S MANUAL CLEANING, STEAM, PRESSURE JET (CUSTOM BUILT TRAILERS CO., INC. MODEL PJC-600) (4940-473-6218) | NOVEMBER 1965 | 56 |
| TM
9-4940-495-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BLAST CLEANING MACHINE MODEL SPECIAL 16W (PAULI & GRIFFIN COMPANY) (NSN 4940-00-277-2999) | APRIL 1980 | 14 |
| TM
9-4940-500-14&P (Sample PDF) |
OPERATOR'S ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY GUN, PAINT MODEL NO. 76 (ECLIPSE SYSTEMS, INC,) (NSN 4940-00-261-8413) | FEBRUARY 1980 | 21 |
| TM
9-4940-503-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR DEGREASER MODEL AUC-81 (NSN 4940-00-356-9891) | OCTOBER 1983 | 35 |
| TM
9-4940-504-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SEPARATOR, OIL AND WATER MODEL S-100-B (METALCRAFT INC.) (NSN 4940-00-242-4100) | MARCH 1981 | 22 |
| TM
9-4940-507-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR SPRAY GUN, PAIN MODEL 15 (BINKS MANUFACTURING COMPANY) (NSN 4940-00-396-1663) | MARCH 1981 | 9 |
| TM
9-4940-509-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR HALOGEN LEAK DETECTOR HH300 (RICCA-REDDINGTON INSTRUMENTS, INC.) (NSN 4940-00-531-0362) | APRIL 1981 | 12 |
| TM
9-4940-516-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR AGITATOR, PAINT MODEL 6 (GRENIER & COMPANY, INCORPORATED) (NSN 4940-00-251-6475) | DECEMBER 1980 | 10 |
| TM
9-4940-524-14&P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR DEGREASER MODEL HT20 (NSN 4940-00-276-8868) (KLEER-FLO COMPANY) | JULY 1981 | 15 |
| TM
9-4940-525-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR CLEANER, STEAM PRESSURE MODEL 200-AO (NSN 4940-00-186-0027) AMERICAN KLEANER MFG. CO., INC. | OCTOBER 1981 | 92 |
| TM
9-4940-531-24P (Sample PDF) |
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR CLEANER, STEAM, HIGH PRESSURE, HOT AND COLD WATER JET, TRAILER MOUNTED (4940-01-025-9856)(EIC: 2BC) | 1 AUGUST 1994 | 182 |
| TM
9-4940-538-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BOOTH, SPRAYING MODEL 225A INLAND MFG. CO. (NSN 4940-00-078-4126) | OCTOBER, 1981 | 26 |
| TM
9-4940-539-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR PRESS, HYDRAULIC MODEL H200-14 (NSN 4940-00-273-1653) NUGIER COMPANY | OCTOBER 1981 | 13 |
| TM
9-4940-540-14&P (Sample PDF) |
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR DEGREASER, VAPOR-SPRAY, STATIONARY SOLVENT TYPE, ELECTRICALLY HEATED MODEL DL-625 4940-00-255-8246 DELTA INDUSTRIES | JULY 1981 | 15 |
| TM
9-4940-542-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PART LISTS FOR AGITATIOR, PAIN SHAKER MODEL 5033/DG (NSN 4940-00-251-6475) (RED DEVIL, INC.) | JUNE 1981 | 17 |
| TM
9-4940-544-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PART LISTS FOR REPAIR KIT HOSE ASSEMBLY MODEL NUMBER: SEHARK (NSN 4940-01-080-4213) | MARCH 1984 | 168 |
| TM
9-4940-549-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT & GENERAL SUPPORT MAINTENANCE REPAIR MANUAL INCLUDING PARTS LIST FOR SHOP EQUIPMENT, GENERAL PURPOSE REPAIR, SEMI TRAILER MOUNTED MODEL: SGPRSMD (NSN 4940-01-006-3229) | MARCH 1984 | 496 |
| TM
9-4940-556-14&P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT & GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR CLEANER, STEAM PRESSURE JET SKID MOUNTED MODEL: RI 2400 (NSN 4940-00-186-0027) | 11 JUNE 1986 | 112 |
| TM
9-4940-658-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATlONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BLAST CLEANING MACHINE MODELS 15L, 25L, 35W, 100, 200E, 300LEA, 300-LA, & 600-LA P.K. LINDSAY COMPANY, INC.) (NSN 4940-00-277-2999) | APRIL 1981 | 19 |
| TM
9-4940-660-14&P (Sample PDF) |
OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR HEATER, GUN TYPE, ELECTRICAL MODEL 5630 (NSN 4940-00-785-1162) ALTON IRON WORKS, INC. | AUGUST 1981 | 24 |
| TM
9-9094-2 (Sample PDF) |
OPERATION ORGANIZATIONAL MAINTENANCE AND FIELD MAINTENANCE 8 X 16-INCH CAPACITY SINGLE-PHASE 60-CYCLE 110/220-VOLT 112-HORSEPOWER HORIZONTAL METAL CUTTING (MACHINE) BANDSAW (WELLS MFG MODEL 8) (40-S-567) | APRIL 1956 | 124 |
| TM
10-4940-201-10 (Sample PDF) |
OPERATOR'S MANUAL CLEANING MACHINE FUEL CAN AND DRUM (BARNES MODELS 4310CA AND 15801CA) | JANUARY 1960 | 42 |
| TM
10-4940-201-20 (Sample PDF) |
ORGANIZATIONAL MAINTENANCE CLEANING MACHINE FUEL CAN AND DRUM (BARNES MODELS 4310CA AND 15801CA) | JANUARY 1960 | 42 |
| TM
10-4940-201-25P (Sample PDF) |
ORGANIZATIONAL, DIRECT AND GENERAL SUPPORT, AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST CLEANING MACHINE, FUEL CAN AND DRUM BARNES MODEL 4310CA, ARMY MODEL SPE 19, (FSN 4940-268-9771) BARNES MODEL 15801CA, ARMY MODEL SPE 19A, (FSN 4940-658-2889) | FEBRUARY 1967 | 28 |
| TM
10-4940-201-35 (Sample PDF) |
FIELD AND DEPOT MAINTENANCE MANUAL CLEANING MACHINE, FUEL CAN AND DRUM (BARNES MODELS 4310CA AND 15801CA) | 2 February 1960 | 8 |
| TM
11-4940-204-15P (Sample PDF) |
OPERATOR, ORGANIZATIONAL, FIELD AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST AND MAINTENANCE ALLOCATION CHART DEGREASER MK-1760/G | 22 March 1960 | 19 |
| TM
11-4940-204-35 (Sample PDF) |
FIELD AND DEPOT MAINTENANCE MANUAL DEGREASER MX-1760/G | 15 January 1962 | 13 |
| TM
11-4940-477-24P (Sample PDF) |
ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR SHOP EQUIPMENT, BATTERY SERVICING, SHELTER MOUNTED AN/TSM-133 (NSN 4940-01-052-3773) | 14 MAY 1984 | 84 |
| TM
55-4940-208-10-1 (Sample PDF) |
Transportability Guidance SHOP EQUIPMENT, GENERAL PURPOSE REPAIR, SEMITRAILER MOUNTED, COUSE MANUFACTURE, MODEL MEDL | 12 January 1964 | 12 |
| TM
55-4940-353-13&P (Sample PDF) |
OPERATOR'S, AVIATION UNIT AND AVIATION INTERMEDIATE MAINTENANCE MANUAL, INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS HOSE TESTER AVITECH MODEL 321 NSN 4940-01-064-5057 | 13 FEBRUARY 1981 | 42 |